Protection Adaptive - ABB SACE Emax 2 Series Operating Instructions Manual

8 - Protection Adaptive

Dual Set The function enables two different protection configurations to be made, one as an alternative to the
82 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
The Adaptive Protection package is available by default for Ekip Hi-Touch and Ekip M Touch and
configurable in the remaining models as additional SW package.
The protection is described below:
other, by means of a set change with programmable events.
The function can be activated in the Settings - Dual Set menu (page 49)
Parameter Description
Enable Activates/deactivates the function
Defines the sets of main and secondary protections (which
Default Set
activate in the presence of the programmed event)
The event that determines set change (from default to secondary) can be programmed in the Advanced -
Functions menu, see the paragraph Programmable Functions and Commands (page 92).
ABB | SACE Emax 2
Default
OFF
Set A
Ekip Touch - Protections
8 - Protection Adaptive