Mechanical Safety Accessories - ABB SACE Emax 2 Series Operating Instructions Manual
Low voltage air circuit-breaker
Hide thumbs
Also See for SACE Emax 2 Series:
Table of Contents
Advertisement
2 - Mechanical safety accessories
KLC: open position key lock The KLC locks the circuit-breaker in the open position.
PLC: padlock The PLC locks the circuit-breaker in the open position.
185 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
It can also be used during maintenance activities on the circuit-breaker after removal of the cover of the
accessory area.
The KLC lock is available with two types of locking:
• lock with different key code numbers (for a single circuit-breaker)
• lock with the same key code number (for more than one circuit-breaker). The maximum number
of key code numbers available is five.
If set up appropriately, the KLC-A lock can work with four other types of locks:
• Ronis
• Profalux
• Kirk
• Castell
NOTE: the supply of Ronis - Profalux - Kirk - Castell locks is at customer's expense.
KLC for E1.2
Information on the assembly is available on the website http://www.abb.com/abblibrary/
DownloadCenter/, in particular for E1.2 in the kit sheets
•
1SDH000999r0702
for key locks with lock supplied by ABB
•
1SDH000999r0703
for the key locks with pre-engineering for Ronis - Profalux - Kirk locks
•
1SDH000999r0718
for the key locks with pre-engineering for Castell locks
and for E2.2-E4.2-E6.2 in the kit sheets:
•
1SDH001000r0702
for key locks with lock supplied by ABB
•
1SDH001000r0703
for the key locks with pre-engineering for Ronis - Profalux - Kirk locks
•
1SDH001000r0718
for the key locks with pre-engineering for Castell locks
It is available in two types:
• lock usable with a maximum number of three padlocks with a diameter of 4 mm - 5/32"
• lock usable with a maximum number of two padlocks with a diameter of 8 mm - 5/16"
• lock for a padlock with a diameter of 7 mm - 1/4"-17/64"
WARNING!
The padlock diameter must be respected for safe operation. Smaller diameters than in-
dicated can result in undesired and unsafe operation. This accessory is meant to be used
for regular lock devices with specific shackle diameters. The use of a hasp is not allowed.
Please contact ABB for further information on different dimensions needs.
NOTE: The padlocks are at customer's expenses.
KLC for E2.2 - E4.2 - E6.2
Continued on the next page
Mechanical accessories
2 - Mechanical safety accessories
ABB | SACE Emax 2
Advertisement
Table of Contents
