Huawei NetCol5000-A050 User Manual page 224

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
2.
3.
Step 8 Secure the new compressor to the bracket again using a solid wrench.
Issue 13 (2023-08-20)
NO TICE
After removal, seal the suction and discharge vents immediately to keep the
system clean and prevent moisture from entering the system.
Remove the two M8 bolts under the compressor bracket using a 13#
insulated torque socket wrench (or solid wrench), and pull out the compressor
and bracket.
NO TICE
Do not hold the suction and discharge vents when moving the compressor.
Remove the four nut washers and spring washers that secure the compressor
and bracket using a 13# insulated torque socket wrench (or solid wrench),
and remove the compressor.
Figure 11-20 Removing the compressor bracket
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 Parts Replacement
213