Vertical Installation Scenario (Netcol500-A120) - Huawei NetCol5000-A050 User Manual

NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Figure 4-48 Securing an outdoor unit onto the second layer
1.
2.
3.
Step 7 Connect the beam to the wall by routing M10x30 stainless steel bolts through the
reserved tapped holes on the left and right sides at the top of the base.
----End

4.5.3.3 Vertical Installation Scenario (NetCol500-A120)

Step 1 Secure the base to the ground using four M12x60 stainless steel expansion anchor
bolts, as shown in
Issue 13 (2023-08-20)
Lift the outdoor unit from the front onto the second layer of base, as shown
by (1) in Figure 4-48.
Secure the outdoor unit to the base using four bracket angles on the side
panels. One M10x30 stainless steel bolt is used on the base side, and two
M6x16 stainless steel bolts are used on the outdoor unit side, as shown in
Figure 4-48.
Secure the last beam on the top to the columns of the base using two
M10x30 stainless steel bolts, as shown by (4) in
Figure
Copyright © Huawei Digital Power Technologies Co., Ltd.
4-49.
4 Installation
Figure 4-48.
89