NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual
Step 1 Route the outdoor unit power cable through the cabinet cable hole and connect
the cable to the 1U, 1V, and 1W wiring terminals on the indoor unit.
Figure 4-83 Connecting a power cable for the outdoor unit
(1) Top cable hole
Step 2 Connect the PE cable to the ground bar of the outdoor unit, as shown in
4-83.
Step 3 Secure the cable on the post of the cabinet with cable ties.
----End
4.9.5 (Optional) Installing Power Cables for the Low
Temperature Component
Step 1 Connect the cable delivered with the low temperature component to the L/N
terminal on the QF2 of the outdoor unit.
Issue 13 (2023-08-20)
NO TE
● The preceding figure takes the power cable installation of an outdoor unit with the
single power supply as an example, which is the same as that of an outdoor unit with
dual power supplies.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation
Figure
118