FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
No.
12
5.4 Initial Configuration
5.4.1 Setting T/H Sensor Parameters
Prerequisites
●
●
●
Procedure
Step 1 On the home screen, choose Settings > System Settings > T/H Sensor.
Figure 5-3 Setting humidity and temperature
Step 2 Set Return air sensor 2 to Enable.
Step 3 Set temperature and humidity parameters.
Issue 01 (2022-12-30)
Item
Teamwork control
button
The T/H sensors outside the cabinet need to be enabled when they are
installed, otherwise, skip
If you need to enable a humidity and temperature sensor, log in as the admin
user.
This section describes how to enable Return air sensor 2.
NO TE
You are advised not to modify the parameters that are not listed here.
Copyright © Huawei Digital Power Technologies Co., Ltd.
Note
indicates that there is no teamwork
control at present.
is teamwork control without alarms at
present.
indicates that there is
teamwork control with alarms at present.
Step
2.
5 Power-On Commissioning
indicates that there
85