FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Figure 4-7 Removing the air filter
Step 2 Take out the two return air baffle plates bound inside the unit and the foam
around them.
Figure 4-8 Removing the return air baffle plates
Step 3 Remove the anchor baffle plates bound to the beam of the unit.
Step 4 Take out the desiccant bag.
Step 5 Check whether the bonnet of the needle valve inside the cabinet is missing.
●
Issue 01 (2022-12-30)
NO TE
Store the return air baffle plates properly, which will be used during fan maintenance.
NO TE
When removing cable ties, prevent the baffle plates from falling down and damaging the
internal components and water pan of the unit.
If it is missing, contact technical support.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation
42