Replacing A Fan - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Exercise caution because the unit is still energized after it is shut down on the
screen of the display module.
Step 2 Open the electric control box, turn off the active power switch QF1 and standby
power switch QF2, and remove the air filter in the middle.
Step 3 Remove the cable terminals from the T/H sensor.
Step 4 Pull out the T/H sensor upwards.
Figure 10-3 Replacing the T/H sensor
Before installing the new T/H sensor, ensure that its DIP switch setting is consistent with that on
the original T/H sensor. That is, the first toggle switch is ON, and the others are OFF.
Step 5 Install the new T/H sensor at the original position, and connect the cable
terminals to the T/H sensor.
Step 6 Install the air filter.
Step 7 Power on the equipment and tap Start on the home screen. Ensure that the
equipment is running properly without generating alarms.
----End

10.4 Replacing a Fan

Prerequisites
●
●
Issue 01 (2022-12-30)
NO TICE
NO TE
The fan needs to be replaced.
A spare fan of the same model is available and functional.
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Parts Replacement
123