Replacing A Fan Drive - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Step 11 Reinstall the auxiliary fixture for the fan.
Step 12 Remove the return air baffle plates.
Step 13 Power on the equipment and tap Startup on the home screen. Ensure that the
equipment is running properly without generating alarms.
Step 14 On the home screen, choose Maintenance > Performance Maintenance to enter
the Performance Maintenance screen and clear the runtime of the faulty fan.
----End

10.5 Replacing a Fan Drive

Procedure
Step 1 Tap Shutdown on the home screen of the display module.
Exercise caution because the unit is still energized after it is shut down on the
screen of the display module.
Step 2 Open the electric control box, and switch off the active circuit breaker (QF1) and
standby circuit breaker (QF2).
Step 3 Remove the screws on the drive using a Phillips screwdriver, and pull out the drive.
Figure 10-7 Removing the fan drive
Step 4 Install the new fan drive.
Step 5 Power on the device again and close the electric control box.
Step 6 Install the air filter. Choose Maintenance > Wizard Startup on the home screen
of the display module, start the indoor fan, and check that the fun runs properly
Issue 01 (2022-12-30)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Parts Replacement
126