Optional) Connecting A Motorized Damper; Verifying The Installation - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Step 6 Place the water detection cable onto the fasteners, secure the fasteners, and keep
the water detection cable in close contact with the floor.
Figure 4-42 Securing a water detection cable
Step 7 Connect the water detector to the X201 port on the indoor unit using a network
cable.
Figure 4-43 Connecting the cable for a cable-type water sensor
----End

4.12 (Optional) Connecting a Motorized Damper

For details about how to install a motorized damper, see the document delivered
with the motorized damper.

4.13 Verifying the Installation

After installing the indoor unit, check the components listed in
Issue 01 (2022-12-30)
NO TE
If multiple water detection cables are connected in series, connect the male connector of
one cable to the female connector of another.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation
Table 4-5.
73