Mitsubishi Electric MELSEC iQ-R Series User Manual page 275

No. Name
SB0500 Co-recording slave
station supporting
information
SB0510 Co-recording slave
station setting
information
*1 If the station is communicating in multicast mode, this item is enabled when 'Data link error status of own station' (SB0049) is off.
Description
Stores supporting information on the slave station.
Off: No stations are available for co-recording.
On: Stations that are available for co-recording exist.
For "Stations that are available for co-recording exist." (On) status, each
supporting information can be checked with 'Co-recording each station
supporting information' (SW0500 to SW0507).
Stores the setting information on the slave station.
Off: No stations use co-recording.
On: Stations that are available for co-recording exist.
For "Stations that are available for co-recording exist." (On) status, each
setting information can be checked with 'Co-recording each station setting
information' (SW0510 to SW0517).
Availability
Master Local station
station
Unicast
mode
 
 
Appendix 4 List of Link Special Relay (SB)
Multicast
mode


A
APPX
273