Data Collection Using The Cc-Link Ie Tsn Communication Software - Mitsubishi Electric MELSEC iQ-R Series User Manual

Data collection using the CC-Link IE TSN Communication
Software
The cyclic data of each CC-Link IE TSN station is received using the CC-Link IE TSN Communication Software.
For details on the CC-Link IE TSN Communication Software, refer to the following.
 CC-Link IE TSN Communication Software for Windows User's Manual
No.0
No.0: Master station
No.1, No.2: Local station
No.3: Remote station
(1) CC-Link IE TSN Communication Software (number of connectable modules: 2)
Before using this function, check the firmware version of the RJ71GN11-T2. ( Page 320 Added and
Enhanced Functions)
System configuration
For system configuration, refer to the following.
 MELSEC iQ-R CC-Link IE TSN User's Manual (Startup)
Setting method
When connecting the CC-Link IE TSN Communication Software, set multicast mode to the communication mode.
[Module Parameter]  [Application Settings]  [Communication Mode]  [Multicast]
Precautions
■CC-Link IE TSN/CC-Link IE Field diagnostics
The CC-Link IE TSN Communication Software information cannot be displayed using the CC-Link IE TSN/CC-Link IE Field
diagnostics.
■Network configuration settings
CC-Link IE TSN Communication Software is not detected using the "Connected/Disconnected Module Detection" function.
[Module Parameter]  [Basic Settings]  [Network Configuration Settings]  [Detailed Setting]  [Connected/
Disconnected Module Detection]
1 FUNCTIONS
92
1.8 Others
No.1 No.2
No.3
(1)
Collecting data
(1)
Collecting data