Application Settings - Mitsubishi Electric MELSEC iQ-R Series User Manual

2.4

Application Settings

Set the supplementary cyclic settings, transient transmission group number, and other settings for the RJ71GN11-T2.
: Can be set, : Cannot be set
Item Description
Communication Speed Set the communication speed.
Supplementary Cyclic Set the station-based block data assurance and I/O
Settings maintenance settings.
Transient Transmission Set the transient transmission group number.
Group No. Setting
Communication Mode Set the communication mode.
Parameter Name Set a name for the module parameter if desired.
Dynamic Routing Select whether to enable the dynamic routing function.
Event Reception from Select whether to obtain the events occurring in the
Other Stations other stations.
Module Operation Mode Set the module operation mode.
Security Set the security measures for access to the Ethernet
device.
Interlink Transmission Set link device ranges when cyclic data are transferred
Settings from a station in the own network to a station in a
different network.
Co-recording Setting Set whether to relay a co-recording trigger.
*1 "Station-based Block Data Assurance" cannot be set.
Availability
Master Local
station station
 
*1
 
 
 
 
 
 
 
 
 
 
2 PARAMETER SETTINGS
Reference
Page 110 Communication speed
setting
Page 110 Supplementary Cyclic
Settings
Page 110 Transient Transmission
Group No. Setting
Page 110 Communication Mode
Page 110 Parameter Name
Page 111 Dynamic Routing
Page 111 Event Reception from
Other Stations
Page 111 Module Operation Mode
Page 112 Security
Page 113 Interlink Transmission
Settings
Page 116 Co-recording Setting
109
2.4 Application Settings
2