Mitsubishi Electric MELSEC iQ-R Series User Manual page 103

Precautions
■Device set to "CPU Side"
Set a device range not to overlap the one used for the following:
• "Refresh Setting" in "Basic Settings" of other network modules
• "Link Refresh Settings" in "Basic Settings" of a CC-Link master/local module
• I/O numbers used for I/O modules and intelligent function modules
• "Refresh settings" of intelligent function modules
• Module label being used (when performing refresh settings in "Refresh Settings" under "Basic Settings")
• "Refresh Setting between Multiple CPUs" of "CPU Parameter" for a multiple CPU system
■Link refresh range
Set only link devices used in the CPU module for link refresh range. Doing so will reduce the number of excess points,
resulting in a shorter link refresh time.
■Changing link device assignment in "Network Configuration Settings" of "Basic Settings"
Correct the set range in "Refresh Setting" of "Basic Settings".
■Setting the parameter using the CCPASETX instruction
The RJ71GN11-T2 operates without setting the refresh. Access directly a link device using direct access because the link
refresh cannot be executed.
2 PARAMETER SETTINGS
2.3 Basic Settings
2
101