Parameter Processing Of A Slave Station - Mitsubishi Electric MELSEC iQ-R Series User Manual

Parameter processing of a slave station

The processing is to read and save the parameters from the slave station, and to write the saved parameters to the slave
station.
Also, it automatically sets parameters of the slave station from the master station. ( Page 91 Slave station parameter
automatic setting)
When performing parameter processing for the main module to which an extension module is connected, use
the following module.
• The RJ71GN11-T2 with a firmware version of "12" or later
[Navigation window]  [Parameter]  [Module Information]  Target module  [Basic Settings]  [Network
Configuration Settings]  [Detailed Setting]
Select and right-click the slave station, and select "Parameter of Slave Station" to display the "Parameter of Slave Station"
window.
2 PARAMETER SETTINGS
124
2.5 "CC-Link IE TSN Configuration" Window