Huawei UPS5000-E-12 User Manual page 161

UPS5000-E-(40 kVA-320 kVA)
User Manual
3.
After you set network parameters, connect the UPS to the network over a network cable, which enables
you to remotely manage the UPS. If you do not need remote management, retain the default network
parameter settings.
4.
System parameter settings affect UPS operation. When you set system parameters, note the
following:
Issue 10 (2015-09-15)
Figure 5-4 Time screen
On the Network Param. screen, set IP address allocation, IP address, Subnet mask,
and Gateway, as shown in
section 4.1.3.4 Settings
Figure 5-5 Network Param. screen
On the System Param. screen, select Single (default value) or Parallel, as shown in
Figure 5-6. Set the Output voltage level, Output frequency, Battery capacity, and
Number of cells, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-5. For details, see
Screen.
Figure 5-7.
5 Operations
Communications Settings in
152