Maint. Page - Huawei UPS5000-E-12 User Manual

UPS5000-E-(40 kVA-320 kVA)
User Manual
Figure 4-76 Site Config. page

4.2.5 Maint. Page

On the homepage, click the Maint. tab. The Maint. page provides the Calib.,
Commissioning Var., Upgrade, and Download tabs. The maintenance operations cover the
Issue 10 (2015-09-15)
 The NTP parameters are used to set the NTP server address, port, and synchronization interval.
 The default SNMP version is SNMPv3. For a version earlier than UPS V100R001C10SPC008, the
preset password is 12345678; for UPS V100R001C10SPC008 and later, the preset MD5/SHA
password is Changeme1, and the preset DES/AES password is Changeme2. Change the password
after your first login, preventing unauthorized access.

For SNMPv2, the default read and write community names are sread and swrite respectively.

To obtain the MIB file, choose Config. > Site Config. > SNMP > Download HUWEI_UPS_MIB.

SNMP Trap indicates the IP address of the server configured with NMS software. If SNMP Trap is
incorrectly set or not set, system information will be lost or not reported in time.
 The certificate is used for Secure Sockets Layer (SSL) encryption protection for WebUI login. You
need to apply to a third-party institution for the certificate.
 Configuration Management is used to upload and export configuration parameters in the
monitoring system.
 Multi-brand Management is used to load the brand information of a partner to the corresponding
WebUI.
 Configure Alarm Notification Server is used to configure a server for receiving alarm emails from
the monitoring system.

Configure Alarm Notification Email Address is used to configure the email address for receiving
alarm emails from the monitoring system.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 User Interface
146