Monitoring Page - Huawei UPS5000-E-12 User Manual

UPS5000-E-(40 kVA-320 kVA)
User Manual
Default User
administrator)
operator
(common
user)
browser
(browsing
user)
----End

4.2.2 Monitoring Page

After you log in to the WebUI, the Monitoring page is displayed by default, as shown in
Figure
Issue 10 (2015-09-15)
Preset Password
WEB
LCD
WEB
WEB

If you enter incorrect passwords for three consecutive times, you will be locked out for 5 minutes.

After you log in to the WebUI, you will be logged out if another user logs in with the same user
name.
 Change the password after your first login, preventing unauthorized access. You can change the
password in User Mgmt. on the Config. page.
4-66.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
For a version earlier
than UPS
V100R002C01SPC008,
the WebUI preset
password is 000001; for
UPS
V100R002C01SPC008
and later, the WebUI
preset password is
Changeme
000001
For a version earlier
than UPS
V100R002C01SPC008,
the WebUI preset
password is 000001; for
UPS
V100R002C01SPC008
and later, the WebUI
preset password is
Changeme
-
4 User Interface
User Rights
LCD and WebUI, including
system running information
browsing, system information
(historical alarms, logs, e-labels,
and fault data) exporting,
parameter (system parameters
and battery parameters) setting,
system control (startup,
shutdown, troubleshooting,
runtime clearing, and battery
management), system
configuration (network
parameters, user management,
time and date, and site
information), and system
maintenance (upgrade,
calibration, and variables
commissioning).
Only browses the system running
information, exports system
information (historical alarms,
logs, e-labels, and fault data),
starts/shuts down the inverter,
rectify faults, and controls the
buzzer.
Only browses the system running
information.
140