Figure 4-5 Mts 4 And Expansion Cabinet - Drill Hole Position For The Mounting Brackets - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

Floor Mounting Instructions
Procedure 4-1 How to Install the Cabinet Using the Mounting Brackets (Continued)
Figure 4-5 MTS 4 and Expansion Cabinet – Drill Hole Position for the Mounting
Brackets
Secure the two rear brackets to the floor using one screw for each bracket.
3
Place 2 screws for each front bracket (2x2) in the drilled holes. Screw them almost all the way
4
down but leave space rotate the bracket into position later.
Move the MTS cabinet near to the mounting brackets.
5
Move the MTS backwards ensuring that the rear leveling feet of the MTS locate in the
6
corresponding cups in the rear mounting brackets.
Push the front brackets over the corresponding leveling feet and swing them until they engage
7
the screws.
4-10
Chapter 4: Hardware Installation
6802800U74-N September 2009