Configuration; Adding Additional Module Cage To Mts 4; List Of Equipment In The Expansion Kit - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

Configuration
Configuration
When the additional Base Radio has been installed properly it needs to be configured and verified.
In order to do so, follow
In addition to this, the following parameters need to be configured in TESS application:
•
•
•
•
•
•

Adding Additional Module Cage to MTS 4

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
This section describes how to add an additional module cage to MTS 4.

List of Equipment in the Expansion Kit

The following is included when ordering a second module cage to MTS 4 cabinet.
Table 15-2 Equipment in Expansion Kit
Kit number
GMHN4421A
GMPN4227A
GMKN4334A
GMKN4447A
GMGN4419A
GMGN4425A
15-10
Process 6-3, "Base Radio Configuration," on page
Factory password
Field password
Cabinet ID
Position ID
Carrier Number (TX/RX frequencies are auto-generated based on Carrier Number setting)
Default TX Power level
When these parameters have been configured in TESS Application and after the
modified configuration file has been uploaded to the Site Controller, the complete site
needs to be reset to implement the configuration change.
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Description
Module Cage
Power Supply Unit
Power Supply Unit Cables
Main Power Cable
Site Controller Blind Plate
Base Radio Blind Plate
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Chapter 15: Expansion Options
6-13.
■ ■ ■ ■
■
■
Notes
Only included if there is no or only
one Base Radio shipped with the
expansion kit
6802800U74-N September 2009