Pre-Installation Checklist - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
•
•
•
•
•
If any equipment is damaged, contact the shipping company immediately, and
then your Motorola representative.

Pre-Installation Checklist

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Proper installation ensures the best possible performance and reliability of the MTS station.
Preinstallation planning is required. This includes considering the mounting location of the cabinet
in relation to input power, antennas, and telephone interfaces. Also, consider the site environment
conditions, the particular mounting method, and required tools and equipment.
The installation shall only be carried out after the following activities are completed:
•
•
•
•
•
•
•
•
•
•
6802800U74-N September 2009
Check for loose or damaged equipment
Check all sides of the cabinet for dents, scratches, or other damage
Check all cabinet wiring to ensure connections are in place
Check modules and boards for physical damage to controls or connectors
Verify that ground straps are secure
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Antenna installation (including GPS antenna)
New building earth (if required)
The installation of the X.21 or E1 link (to the control centre) by the telephone line service provider
The installation of the cable tray in the equipment room
The increase in the capacity of the mains power supply (if required)
The increase in the capacity of the stand-by mains power supply (if required)
The completion of any civil works on the site (for example, new or modified
accommodation, new access road, and so on)
The position in which each piece of equipment will be placed on the floor
has been marked and agreed
Reinforcement of site floor to accommodate load of site equipment (if required)
All the equipment has been delivered to site and placed in their final positions
by the transportation company
Proper surge protection should be installed on E1/X.21 site links, all antennas, and
power inputs to prevent potential damage to the MTS.
For full instructions and guidelines, please always refer to Motorola Standards and
Guidelines for Communications Sites, R56 manual .
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Pre-Installation Checklist
■ ■ ■ ■
■
■
4-3