E1 And Ethernet Cabling - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual

E1 and Ethernet Cabling

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
E1 cabling refers to the cabling between Site Controller and the E1 connector on the Junction Panel.
Ethernet cabling refers to the cabling between Site Controller and Base Radios.
Table 5-6 and
Table 5-6 E1 and Ethernet Cabling for MTS 2
Index
1 3066544B01
2 3066544B02
3 3066567B01
6802800U74-N September 2009
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Either E1 or X.21 cabling is used, depending on which option is ordered.
Table 5-7 identify and
From Unit/
Cable Part
Connection
Number
Name
Base Radio 1 / SC1
Base Radio 2/ SC1
Site Controller/ E1
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Figure 5-6 and Figure 5-7
To Unit/ Connection
Name
Site Controller/ BR1
Site Controller/ BR2
Junction Panel/ E1
E1 and Ethernet Cabling
■ ■ ■ ■
■
■
show E1 and Ethernet cabling.
Notes
Ethernet link/ Grey cable
Ethernet link/ Black cable
E1 link/ Green cable
5-11