MTS - Restoring SC and BRC Application and SC Firmware
MTS - Restoring SC and BRC Application and SC Firmware
MTS - Downloading the Site Controller Application
Procedure 8-8 MTS - How to Download the Site Controller Application
1
2
3
4
5
6
7
8
9
8-24
If the Site Controller has correct version of software, go to
attrib to verify the software version of the Site Controller.
Please refer to the Software Release Notes to confirm the appropriate software version.
Start up the TESS application as described in
on page
8-19.
Select Send Files, and then select Send Application Files.
Result: The Files for Transmission window appears.
Insert the CD containing the MTS Application Files into the programming PC.
Using a combination of Drives and Folders menus, browse to the CD until you find the folder
entitled SWDL. Double-click swdl, double-click xfer, double-click TSC, double-click MTS,
and then double-click APP.
Result: Version of the Site Controller application appears on the left window.
Click the Site Controller version, which appears under the File Name window, and then click
Open.
Result: The File Download Properties window appears at the top of the window, showing the
version of the Site Controller application you are about to upload.
Change the S/W version label as required by entering a new name in the filename box.
This is optional and normally is left blank.
Click in the Use Next box.
Click on Update Selected Items and verify that the Site Controller application version at the top
of the window now has + under the word Next. Click OK.
Result: If there is already an application file in both Site Controller bank 1 and bank 2, a
window appears prompting you to select the file that is to be replaced, that is, overwritten
by the file you are about to upload.
Select the file that is NOT currently set to Current and Next i.e. the one that is not currently
being used and generally an older file from a previous upload and click OK.
Procedure
Procedure 8-4, "MTS - How to Set Up a Terminal,"
Chapter 8: Site Controller
8-11. Enter command
6802800U74-N September 2009