Page 2
Motorola, Inc. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
The VAP2400 operates via two (or more) integrated units. You’ll dedicate one unit as the Access Point and the other unit (or units) as its Client. When you connect a VAP to your home gateway, it auto-configures as an Access Point.
This manual provides you with instructions on how to install your VAP2400 series video bridge. Motorola designed the VAP2400 series to install and integrate easily with your set-top box and home network. If you encounter any difficulties during the installation process, refer to the Troubleshooting section at the end of this manual.
Solid Green = The VAP is functioning as an Access Point Solid Amber = The VAP is functioning as a Client Blinking Amber = There is an error. Refer to “Troubleshooting” for more details. Off = The automatic configuration process has failed VAP2400 Wireless Video Bridge • Installation Manual...
Resets the VAP to its default settings WPS Button Establishes wireless connection to your home network Ethernet Port Connects to an Ethernet-equipped computer, hub, or switch using an RJ-45 cable connection Power Jack Provides power to the VAP2400 VAP2400 Wireless Video Bridge • Installation Manual...
Connect the power adapter to the VAP and plug the adapter into a wall outlet. You’ll see the power LED on the unit’s front panel light green, indicating the unit is powered: Check to ensure the operational mode LED lights green, indicating the VAP is functioning as an Access Point. VAP2400 Wireless Video Bridge • Installation Manual...
Connect the power adapter to the VAP and plug the adapter into a wall outlet. You’ll see the power LED on the unit’s front panel light green, indicating the unit is powered: VAP2400 Wireless Video Bridge • Installation Manual...
Page 11
Access Point and the Client. Check to ensure the operational mode LED lights amber, indicating the VAP is functioning as a Client. You now can begin streaming video content to your secondary set-top box or boxes. VAP2400 Wireless Video Bridge • Installation Manual...
Connect the power adapter to the VAP and plug the adapter into a wall outlet. You’ll see the power LED on the unit’s front panel light green, indicating the unit is powered: VAP2400 Wireless Video Bridge • Installation Manual...
Page 13
Check to ensure the operational mode LED lights amber, indicating the VAP is functioning as a Client. Your VAP is now ready to stream content to the device equipped with the VAP adapter. VAP2400 Wireless Video Bridge • Installation Manual...
Troubleshooting If you cannot find a solution to your problem in this manual, or to otherwise get assistance with your VAP2400, contact your service provider. Solutions If the solutions listed here do not solve your problem, try pressing the Reset button on the rear panel of the Access Point and/or Client.
Page 16
VAP units dedicated as Access Points and amber on VAP units dedicated as Clients; see pp. 9–11 for more details.) If you experience this problem, contact your service provider for assistance. VAP2400 Wireless Video Bridge • Installation Manual...
Retain the instructions for future reference. • Comply with all warning and caution statements in the instructions. Observe all warning and caution symbols that are affixed to this equipment. • Comply with all instructions that accompany this equipment. VAP2400 Wireless Video Bridge • Installation Manual...
Page 18
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: VAP2400 Wireless Video Bridge • Installation Manual...
Page 19
Motorola, Inc., Broadband Communications Sector, 101 Tournament Drive, Horsham, PA 19044, 1-215-323-1000, declares under sole responsibility that the VAP2400 complies with 47 CFR Parts 2 and 15 of the FCC Rules as Class B digital devices. These devices comply with Part 15 of FCC Rules. Operation of these devices is subject to the following two conditions: (1) These devices may not cause harmful interference, and (2) these devices must accept any interference that may cause undesired operation.
Page 20
FCC CeRtiFiCation The VAP2400 contains a radio transmitter and accordingly has been certified as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators. Products that contain a radio transmitter are labeled with FCC ID and the FCC logo.
Page 21
Canada Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. VAP2400 Wireless Video Bridge • Installation Manual...
Page 22
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. VAP2400 Wireless Video Bridge • Installation Manual...