Preparing The Hydran 201Ti; Removing The Cpu Module; Figure 6-3 - Screws Used To Fasten The Cpu Module - GE Hydran 201 i Instruction Manual

6.3.2

Preparing the Hydran 201Ti

6.3.2.1

Removing the CPU Module

1. Unscrew the H201Ti's aluminum cover knob.
2. Remove the cover.
3. Remove only the two screws used to fasten the CPU module and identified with
arrows (see Figure 6-3 on page 6-19).
Part 17997
H201Ti V2.2x
MainMenu

Figure 6-3 - Screws Used to Fasten the CPU Module

Rev. 6, March 2011
Installation
6-19