Hydran 201Ti Installation; Incoming Inspection And Verification; Receiving And Unpacking - GE Hydran 201 i Instruction Manual

Please read the following Sections before proceeding with the installation:
• User interface, in Section 4.1 on page 4-1
• General warnings, in Section 5.1 on page 5-1
• Installation overview, in Section 5.2 on page 5-7
Note: It is recommended to use the Hydran Host software rather than the H201Ti's user
interface (keypad and display). See the Hydran Host Software Manual.
6.1

INCOMING INSPECTION AND VERIFICATION

It is strongly recommended to verify the operation of the H201Ti's and Hydran 201Ci
Controllers before their installation. This verification also confirms that no damage
occurred during shipping and allows the user to become familiar with the
Hydran 201i System. The H201Ti installation procedure is described in Section 6.3 on
page 6-17.
6.1.1

Receiving and Unpacking

Upon receipt, the shipping box contains one preassembled H201Ti, complete with a
transmitter enclosure, a Hydran 201 sensor, electronic modules (CPU and I/O), and a
flanged brass adaptor. For the shipping list, see Section 6.1.2 on page 6-2; for a detailed
view of the component assembly of the H201Ti, see Figure 6-2 on page 6-18.
1. Open the shipping box.
2. Remove the documentation and the small bag containing accessories and tools.
3. Carefully remove the H201Ti from the box.
Do not remove the plastic cap from the flanged brass adaptor. This
WARNING
CAUTION
cap protects the adaptor's threads and membrane.
Part 17997

Hydran 201Ti Installation

Rev. 6, March 2011
Chapter 6
6-1