Yamaha SIGMA-G5SII Service Information page 94

1) Set the SET/RUN switch to " SET " and press the MODE key once to go to the
Operation Mode Setting. Change the indication using the UP/DOWN key to show
the following indication.
2) Press the MODE key once to go to the Detection Function Setting.
Change the indication using the UP/DOWN key to show the following STND
(standard setting) indication.
3) Press the MODE key once to go to the Timer Function Setting.
Change the indication using the UP/DOWN key to show the following "--"
indication.
4) Press the MODE key once to go to the Timer Function Setting.
Change the indication using the UP/DOWN key to show the following AND
indication.
5) Press the MODE key once to go to the Timer Function Setting.
Change the indication using the UP/DOWN key to show the following PTUN
(Power Tuning Start) indication.
Press the MODE key once to go to the Power Tuning Target Value Setting.
Change the target value using the UP/DOWN key so that the value shows "500".
6) Press the MODE key once to go to the RUN Mode Display Setting.
Change the indication so that the left indication shows the light receiving level and
the right indication shows the threshold value.
Light Receiving Level
Threshold Value
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
94/273
For Service Engineer