Yamaha SIGMA-G5SII Service Information page 261

③ NT-100 System Software Installation
"
When the Install Launcher
"
Series and press the
up.
When the "InstallShield Wizard" window opens, go forward the installation
operation according to the instructions in the window.
After the installation is completed, wait for about 30 seconds until the next window
opens.
(The following blue window is for "InstallShield Wizard".
④ CAD Conversion Software Installation
About thirty seconds after the NT-100 system software installation completion,
the CAD conversion software installation window is displayed automatically. After
the window is displayed, perform the installation operation according to the
instructions in the window.
⑤ PC Restart-up
About 30 seconds after the CAD conversion software installation completion, a
message urging the restart-up is displayed. Perform the restart-up operation
according to the instructions in the window.
Service Information
"
window opens, select
" " "
Install button. The InstallShield Wizard
SI1705004E-00=SIGMA-G5SII Service Manual
261/273
For Service Engineer
"
Basic Package for SIGMA
"
will be started