Component Recognition Camera Position - Yamaha SIGMA-G5SII Service Information

1.4.5.7. Component Recognition Camera Position

Under each of the following conditions, this teaching is required.
 It affects the placement accuracy directly.
 The offset teaching is to be performed when the machine is delivered.
 The head has been changed.
 The PEC recognition camera is to be changed.
 The component recognition camera is to be changed.
 X-axis or Y-axis linear scale and scale head are to be changed.
Purpose
The deviation from the designed distance from the machine reference coordinate origin to
the component recognition camera center is adjusted.
Required Jig and Tool
QFP Glass Jig
Vacuum Nozzle
Service Information
: JG-0188 1 unit
: HA19C 1 unit
Fig.A31-1
SI1705004E-00=SIGMA-G5SII Service Manual
35/273
For Service Engineer
QFP Glass Jig
JG-0188
Fig. A31-2