Offset In The Installation Operation (High-Speed Head); Differences From Sigma-G5S And Precautions (Installation Adjustment Related) - Yamaha SIGMA-G5SII Service Information

1.4.4. Offset in the Installation Operation (High-Speed Head)

1.4.4.1. Differences from SIGMA-G5S and Precautions (Installation Adjustment Related)

(1) Leveling/Running-In/Data Save
(1.1) The bank feeder change cart specialized for SIGMA-G5S is used.
(1.2) For NT-100 for the communication with the machines, the version
(2) Offset Measurement/Teaching
(2.1) The origin position of the DD motor is the same as that in SIGMA-G5S.
(2.2) Insert the nozzle or jig carefully so that such nozzle or jig is not interfered with
(2.3) The zeroing operation is performed in the adjustment operation using the
(2.4) The X-axis has been changed from linear driving type to ball screw driving
(2.5) The standard value of the master nozzle offset is 0.2 to 0.7 mm.
(3) Placement Accuracy Adjustment
(3.1) For the high-speed nozzle, use the nozzles for SIGMA series.
(3.2) For BARON accuracy measurement program, the SIGMA-G5SII dedicated
(3.3) The tape feeder for SIGMA-G5S is used and the components are set on it.
Model
GT-38080
GD-
38080
GD-
38083
(3.4) The USL/LSL and standards used in the CPK measurement, are as follows.
recommended by the Quality Assurance Department, is to be used. For the use
of NT-100, the license for SIGMA-G5SII is required.
(The position of the No. 1 nozzle is inside the machine when the DD motor is
at the home position.)
the side view camera, etc.,
control menu.
type. Therefore, when the X-axis is moved manually, it feels slightly heavier.
When the X/Y-axis is moved in the Manual Operation window (displayed from
Control Window), it can be moved quickly and efficient operation is available.
(0402/HG24C, 0603/HG33C, 1005/HG52C)
data is required. (There are data items each for L/R flow and Reference.)
Tape Width
× Types
Feed Pitch of Tape
(mm)
8 × 2
Paper
8 × 4
8 × 2
Embossed
8 × 4
8 × 1
Paper
8 × 2
8 × 2 Embossed
0603 X,Y Total ±0.025 Theta: 5 degrees, CPK Value: 1.00 or more
For Each Angle ±0.030
Service Information
Standard Set Reel
Chute
Outer Diameter
Height
×
(mm)
Width (mm)

178 to 382
× 100.4
14.4
Fig. A19
SI1705004E-00=SIGMA-G5SII Service Manual
23/273
For Service Engineer
Referential
Remarks
Components
1005
2012
 Barcode Label
3216
3225
Color : White
 Barcode Label
0402 Color : Blue +
0603 White
 Applicable to 1
1005
mm pitch tape
CPK Value: 1.00 or more