Offset Teaching (Ship. Adj.) Window - Yamaha SIGMA-G5SII Service Information

1.4.5. Offset Teaching (Ship. Adj.) Window

For the adjustment after the installation, perform the
1.4.5.13.
[Delivery Adjustment/Teaching Flow Chart (1)] (1/2)
[1] NL-Axis Origin Offset/Master Nozzle Level
 Jig to be used: Master Nozzle (For high-speed head) : JG-0293
[2] Placement Level Offset (Head Up/Down Offset)
 Jigs to be used:
 Placement Height Confirmation Supporting Jig : JG-0191
 Master Nozzle (For high-speed head) : JG-0293
[3] Chute Level (For shipping)
 Jig to be used: Master Nozzle (For high-speed head) : JG-0293
[4] Stocker Master (For shipping)
 Jig to be used: Master Nozzle (For high-speed head) : JG-0293
 Automatic Height Teaching Jig (For high-speed middle-size odd-shaped
stocker) : JG-0297
 Automatic Height Teaching Jig (For multi-functional stocker) : JG-0298
[5] Pick-up Level
 Jig to be used: Master Nozzle (For high-speed head): JG-0293
 Automatic Height Teaching Jig: JG-0342
[6] PEC Recognition Camera & Beam Offset
 Jig to be used: Table Offset Jig: JG-0258
[7] Component Recognition Camera Position
 Jig to be used : QFP Glass Jig : JG-0188, HA19C
[8] Head Rotation Theta Axis
 Jig to be used : QFP Glass Jig : JG-0188, HA19C
Service Information
thirteen
Fig. A20
SI1705004E-00=SIGMA-G5SII Service Manual
25/273
For Service Engineer
steps from 1.4.5.1 to
(Normal)