Yamaha SIGMA-G5SII Service Information page 267

④ Restart up the machine.
⑤ The InstallShied Wizard is displayed in the window in the machine. Perform the
installation operation according to the instructions in the window.
⑥ After the installation, the [Restart] button is displayed in the window in the
machine. Press it to restart up the machine.
(9) Machine Data Communication
The data in the machine is received and deleted.

Pattern Program Recognition Image

System Log

Analysis Data Collection

Screen Shot

Individual File Communication
(10) Maintenance Warning Communication
The cycle of the periodical maintenance is managed.

List

Oiling Check

Maintenance Check

Designated Check

Common Setting

Maintenance History
(11) Alternative Component List Communication
Alternative Component List : This list is registered in advance to continue the

Multi-vendor system means that the components manufactured by two or more
makers are employed, not using the component manufactured by a single
maker.

There is only one alternative component list that can be saved in the machine.

The alternative component list that is sent to the machine last, is reflected.

When the pattern program name is the same as the alternative component list
name, the alternative component list is dedicated to the pattern program. In
such a case, when the pattern program data is sent to the machine, the
alternative component list is automatically sent to the machine. When there is no
alternative component list with the same name of the pattern program data
name, a message is displayed.
 It is effective when the components are used up, but it is unsure which maker's
component is used.

Setting Location in the Machine : Select
Service Information
production by means of changing the deficient component
ID to the other component ID, when component shortage
occurs during the automatic operation.
"
Product
"
Alternative Component List
SI1705004E-00=SIGMA-G5SII Service Manual
267/273
For Service Engineer
" " "
, Production Data and
"