6.1.2.4. Machine Software Installation
The machine software installation program for the initial setting is partly different from
that for the OS recovery operation. Refer to the following flow chart. Refer to the items
described in the execution flow chart for the operation details.
Refer to Item (4)-1.
Unconnected
Refer to Item (4)-2.
Copy the machine software
installation data from CD-ROM.
Refer to Item (4)-4.
No
Start
Is Machine Software
Initial Setup required?
Yes
CD-ROM Connection
Judgment
Connected
Is Machine Software
Setup Started?
Yes
End
230/273
Service Information
No
Refer to Item (4)-3.
New
Machine Software Setup
SI1705004E-00=SIGMA-G5SII Service Manual
For Service Engineer
Selection
Recovery