Multi - None - None - None - Yamaha SIGMA-G5SII Service Information

3.1.4.3. Multi - None - None - None

Standard Specifications for the Nozzle Stocker Unit for Multi-Functional Nozzle
Note:
(1) Connect the nozzle stocker as shown in the following figure.
Set the Up-Status Detection Sensor for the Nozzle Stocker Unit for Multi-Functional Nozzle to
" "
AND .
(2) Because the print mark for the connectors for the nozzle stocker addition shutter valve is only
" " " "
XUP , mark 2 additionally on the connector using a magic pen, etc., as shown in the following
figure.
(3) The shutter valve (for addition) for the nozzle stocker for high-speed nozzle has been attached as
standard configration. However, unless the nozzle stocker for high-speed nozzle is added, it does
not function.
Service Information
Fig.C8
SI1705004E-00=SIGMA-G5SII Service Manual
87/273
For Service Engineer