Power Option Check - Yamaha SIGMA-G5SII Service Information

(5) In the
(TCP/IP V4) " and press the [Properties] button.
(6) Select the
" IP Address " and " Subnet Mask " data boxes.
Note:
For the subnet mask, it should be the same as the subnet mask set as the device to be connected to
LISA.
For IP address, the address should not be duplicated with any of those used in the machines connected
in the same network.
Note:
For the connection with the any other PCs, execute
" "
command ping . However, unless the firewall is cancelled in the PC where the command is to be
received, the result will be

7.1.2.2. Power Option Check

(1) Click " Control Panel " in the " Start " menu to display the " Control Panel " window.
(2) Click " System and Security " and in the displayed window, select " Power Options "
item.
" Local Area Connection Property " window, select " Internet Protocol Version 4
" Use the Following IP Addresses " button and input the parameters into the
" "
NG (No Good).
Service Information
" "
Command Prompt
SI1705004E-00=SIGMA-G5SII Service Manual
242/273
For Service Engineer
and confirm it using the