Unit Home Return; Selected Axis Home Return - Yamaha SIGMA-G5SII Service Information

2.2.2.1. Unit Home Return

The conveyor home return operation is described.
Select " Unit Adj. " and " Conveyor " and then select " Zeroing " in the " Control Switch " section
and press the [START] button on the operation panel. The conveyor unit will return to the
specified position.
* During the operation, the [START] button illuminates in green and when the operation is
completed, the button's illumination is turned OFF.

2.2.2.2. Selected Axis Home Return

Described here is that the NL motor for the Head No. 1 is changed with another one and the
single axis home return is performed.
Select " DVC Check " , " MOTOR " and " Operation " in this order.
Select " Block #1 " , " NL " and " Sel axis " in this order and press the [START] button on the
operation panel.
* During the operation, the [START] button illuminates in green and when the operation is
completed, the button's illumination is turned OFF and the home return operation of the
NL-axis only is completed.
Service Information
SI1705004E-00=SIGMA-G5SII Service Manual
63/273
For Service Engineer