7.2. NT-100 Setting and Communication
7.2.1. Software Set-up
The software set-up operation is required when the software is newly introduced after the
OS set-up, or the software is updated.
(1) Fixed IP Address Setting
By means of setting the fixed IP address, the automatic IP address change when the
PC is re-started up, is prevented.
When the IP address is changed, the communication between the machine and the
NT-100 system software is unavailable. Therefore, make sure to set the fixed
address.
(*Confirm the fixed IP address value with the network manager).
When PC is started up, press
When the
Center
"
①
"
"
Control Panel
window is displayed, press
"
.
Service Information
"
Control Panel
in the start menu.
SI1705004E-00=SIGMA-G5SII Service Manual
254/273
For Service Engineer
②
"
Network and Sharning