Table of Contents
Advertisement
3.
Press the ENTER key and choose the tab of the preprocessing group which was selected at the
step 2.
The cursor moved to the cell in "Filter" column and "1ST" row.
4.
Press the ENTER key while the cursor is positioned the cell
in the Filter column and 1ST row.
A list of filters is displayed in the status display area.
5.
Select the desired filter.
When you moved the cursor, the image preprocessed
according to the selected filter is displayed. Choose the desired
filter while checking the image.
Depending on the type of preprocessing, you may be able to
select a degree of preprocessing. Choose the desired filter
while checking the image.
For example, if you choose "Dilation", you can select "3x3" or
"5x5" size (see the figures on the right).
6.
Check to make sure that the selected preprocess is set and press the C key twice.
When you returned to the checker menu, the selected filter group is
displayed.
Now you completed the settings for preprocessing.
If you want to set multiple phases, select the cell in "Filter" column
and "2ND" row at step 4. Select the desired preprocessing at step 5.
You can follow the same steps when setting the preprocessing for
the rest of the phases.
To cancel the preprocessing
To cancel the preprocessing, select "None" from the Filter menu.
79
Advertisement
Table of Contents
