Table of Contents
Advertisement
Inspection Condition- If the "Inspection Object" is "Low Contrast"
The Low Contrast function is effective if the contrast between the object image and the background is very low or
the some parts of the image of the object may disappear, chipped or shielded, or for the noises in the uneven
background. But, the image processing time in the mode will be longer than in normal mode.
If "Inspection Object" is set to "Low Contrast", the function used for stably detecting the low contrast object image
and the "Filter Adjustment" function are available. You can save the image from which unnecessary elements
(noises) were removed as a template.
Refer to the table shown below for the settings of Low Contrast.
Selection Guide for Inspection Method in Accordance with the Features of the Object
Features of the object
Contrast
Overlapped/C
hipped
Good (High)
No
Good (High)
Yes
Bad (Low)
Yes /No
To make Filter Adjustment
The Filter Adjustment function binarizes the object image and background using the following functions. The
function is used for processing the template image that has been already saved. Therefore, if no template is
saved, the Filter Adjustment function cannot be used.
No.
Item
Setting value
1
Extraction
Auto / Manual
Filter
2
Object
White / Black
Color
3
Denoising
1 - 80
4
Distortion
1 - 95
5
Expansion
1 - 4
With the use of Denoising, Distortion
and Expansion functions, remove
unnecessary elements in the object
image to neatly binarize the object
image and the background.
Inspection method
(recommended)
Inspection
Filter
object
Normal
---
Low Contrast
No
Adjustment
Low Contrast
Adjustment
Description
Select whether to configure the settings of the items 2 to 5 automatically or
manually.
Select "Auto" and check the template. If the template is not the one you
want, change to "Manual" and configure the settings of the items 2 to 5 in
numeric order.
If the object image is brighter than the background, select "White". If the
object image is darker than the background, select "Black".
Removes unnecessary noises around the object image. As the setting
value increases, the more noises are removed.
Extracts the part having contrast. If some parts of the extracted object are
chipped away, increase the setting value. If the object is expanded,
decrease the setting value.
Expands the extracted object. Make up the chipped or missed parts of the
object that cannot be adjusted by using the Distortion function.
Before filter adjustment
Main purpose
Type recognition，
Quality inspection,
position detection, etc.
Position detection
After filter adjustment
Processing
speed
Fast
Slow
119
Advertisement
Table of Contents
