Run Mode Image Settings - Panasonic MICRO-IMAGECHECKER PV310 Use Manual

8.5 RUN Mode Image Settings

You can set the type of an image displayed in the image display area and select whether or not to display other
items in RUN Mode. The type and color of a display image can be temporarily switched by pressing the B key in
SETUP mode. Once you switch from SETUP mode to RUN mode, the image of the type and color that you have
selected here is displayed.
The items settable with the use of RUN Mode Image Settings
Item
Display Camera Image
Display Gray Value
/Binary
Checker Shape
Marker
Ref. Point
Data Monitor
Alignment of Data
Monitor
Number of rows
Number of columns
Option Description
Live-C1 To switch the display images (the type of an image)
Live-C2
•
Live-C1+C2
•
Memory-C1
Memory-C2
* C1: Camera 1
Memory-C1+C2
* C2: Camera 2
Gray Value The specified image is displayed in RUN mode.
/ Binary Groups A - H
•
•
On/Off To select whether or not to display a area frame of an checker in
RUN mode
On/Off To select whether or not to display a marker in RUN mode
On/Off To select whether or not to display a line of reference
coordinates in RUN mode
On/Off To select whether or not to display the Data Monitor table in
RUN mode
Default/ Right /Right To select the display position of the Data Monitor table
Top/Left
Bottom/Left/Left
Top/Up/Left Top
/Center
1 – 10 To select the number of rows in the Data Monitor table
1 – 5 To select the number of columns in the Data Monitor table
By which camera the image was captured?
Live image or memory image?
Gray Value
Binary Groups A - H:
A binary image is displayed at the specified slice level.
205