Saving An Image Per Inspection; Saving The Images Of Which The Conditional Formula Was Judged As Ng - Panasonic MICRO-IMAGECHECKER PV310 Use Manual

9.3.3 Saving an Image per Inspection

Whenever the camera captures a new image, the PV310 saves it, but the maximum number of images that can
be stored in a memory is 16 pairs of images per memory. (When the number of images reaches the largest
number, see page 228.)
Setting Procedure
1. Select "Save Image Mode" from the ENVIRONMENT
menu.
The submenu is displayed.
2. Select "Save Image".
The subwindow appears.
3. Highlight "Per Start".
Now you complete the setting for saving an image per
inspection.

9.3.4 Saving the Images of Which the Conditional Formula Was Judged as NG

During the execution of inspection, the image of which the conditional formula for "Image Save" was judged as
"NG" is saved. But, this function is effective only if a Numeric Calculation formula has been saved as a conditional
formula for "Image Save". The number of the images that can be stored in the PV310 is up to 16 pairs of images.
Setting Procedure
1. Select "Save Image Mode" from the ENVIRONMENT
menu.
The submenu is displayed.
2. Select "Save Image".
The subwindow appears.
3. Highlight "Judg. Result".
Now you completed the setting for saving images during
inspection.
Registering Conditional Formulas to save images: Page 187
227