Table of Contents
Advertisement
13.3 Backing up/restoring Setting Data and Images
13.3.1 Backing up/restoring Setting Data
Backing up Setting data
Setting data are backed up per product type and a file is created per product type.
1.
Select "CARD" from the menu bar in SETUP mode.
The menu is displayed.
2.
Highlight "Backup".
The subwindow is displayed.
If the following message appears, check if the Compact Flash memory card is
properly inserted.
E0220 CF card not inserted.
3.
Move the cursor to the number right next to "Setting Data" and press the ENTER key. Assign the
number of the folder in which the setting data you want to restore exist (01 to 99).
The name of the folder in which image data are saved is preset to "Program"
but a number followed by the folder name must be specified.
For example:
If a number 01 is assigned to a holder the folder name will become
"Program01" and the image data file will be stored in the Program01 folder.
4.
After specify the folder number and press the ENTER key.
As the dialog message appears, choose "YES" to continue.
Backing up the setting data will start.
If the dialog message shown below appeared, the number of the folder specified at step 3 already exists on
the Compact Flash memory card. Select "YES" to erase the existing image data together with the folder and
newly save the current image data on the Compact Flash memory card.
Data already exists. Overwrite?
If the following message shown below appeared, the Compact Flash memory card does not have enough
storage capacity to save the image. Use a Compact Flash memory card with sufficient storage capacity.
E0240 CF memory used up.
298
Advertisement
Table of Contents
