Table of Contents
Advertisement
5.
Choose "Num.Calcu".
The cursor moves to the number right next to "Num.Calcu".
6.
Specify the number of referred Numeric Calculation to "01" and press the ENTER key.
"CA01", "OK Count" and "Yes" are displayed in the Object
column, Data Type and Output columns respectively.
7.
Make sure the cursor is positioned in the cell in the Data Type column and QS01 row and press the
ENTER key.
The subwindow is displayed. Select the data that
you want to display in the QS01 row from the Data
Type option list (see the right figure shown below).
8.
If you do not want to output the output data to the external device, make sure that the cursor is in
the Output column and QS01 row, press the ENTER key and then select "No".
7.4.5 Deleting the Data Referred to Statistics
To delete Statistic data, follow the following steps while the Statistics tab is open.
1.
Highlight the number of statistics you want to delete and press the B key.
The subwindow is displayed.
2.
Choose "Delete".
The following message is displayed.
Are you sure you want to delete?
3.
Choose "YES".
The data saved as the selected statistic No. are erased.
191
Advertisement
Table of Contents
