Panasonic MICRO-IMAGECHECKER PV310 Use Manual page 278

Gray Edge- Reading Edge Threshold ([%H]) (For Gray Edge checker)
Communication Direction
From external device to PV310
Response: Normal
Response: Error 1
Response: Error 2
• ERROR signal = "ON"
• Error Code: E0176 is
displayed on the screen
270
Command / Description
% H ? ? CR
?? : 01 to 99 (Specify the number of the target checker in 2-digit form)
Serial Communication - Command: "Comma separated"
% H ? ? , n
?? : 01 to 99 (Checker No.: 2 digits)
nnn: 001 to 255 (Edge threshold: 1 to 3 digits)
Serial Communication - Command: "Fixed Length"
% H ? ? n n
?? : 01 to 99 (Checker No.: 2 digits)
nnnn: 0001 to 0255 or 001 to 0255 (Edge threshold)
nnnn :0001 to 0255: Unused digits are filled with '0'.
nnnn :0001 to 0255: Unused digits are filled with 'Blanks'.
% U CR
Cause:
Command in the unspecified form or not provided was received.
Examples:
C
- %T1,80,255 (any other checker number than 01 to 08 was specified)
R
C
- %B01 (not provided command)
R
% Z CR
Causes:
• The checkers saved as the specified number are different from the target
checkers of this command.
• No checkers are saved as the specified numbers.
n n CR
n n CR