Midi Indicator - Yamaha A3000 Owner's Manual

Other Keys and Operations
A/D Input

MIDI Indicator

Chapter 3 Basics
92
This special feature lets you pass an analog signal through the A3000 at the same time
as you are playing out your programs. You would typically use this feature when you
wish to combine a vocal performance with A3000 program play.
You must supply the analog signal to the A/D input(s) on the front panel. You may elect
to pass this signal through any of the available effects on its way through the A3000.
You can set this feature up using the PLAY mode SETUP function. ( 132)
The A3000 lets you know that it is currently receiving MIDI data by blinking one of the
lamps on its five mode buttons. The blinking lamp indicates the type of data that com-
ing in, as follows.
Received Data Type
Note On/Off :
Control Change :
Pitchbend :
Aftertouch :
Program Change :
But note that these indications do not operate with respect to data types that are filtered
out by the MIDI Receiving Filter ( 309).
Blinking Lamp
PLAY lamp
EDIT lamp
RECORDING lamp
DISK lamp
UTILITY lamp