Sequence Function; Sequence - Seqsel (Select Sequence) - Yamaha A3000 Owner's Manual

SEQUENCE Function

SEQUENCE - SeqSel (Select Sequence)

Selects a sequence for playback or recording.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knobs 2, 3
Knob 5
Chapter 8 UTILITY Mode
296
SEQUENCE Function
A sequence is a recorded series of MIDI performance data (MIDI instructions). The A3000
records a sequence by memorizing the MIDI data that you send from a MIDI keyboard
or other such MIDI device. When you play the sequence back, the A3000 reproduces the
same series of instructions.
The A3000's sequencing feature is ideal for capturing performance ideas involving break
beats and phrase samples. Note, however, that the A3000 is not designed to offer the
capabilities of a professional sequencer, and does not support MIDI clock synchroniza-
tion, sequence editing, or other such functions.
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to select a sequence for playback or recording.
Change Page
• Turn the knob to switch between the function's SeqSel and Play&Rec pages.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Sequence
• Turn either knob to select the sequence that you want to play or over-record. The
name of the selected sequence appears above the knobs.
• You can change the name of the sequence by pushing either knob to proceed to the
name editing screen. For information about how to edit name strings, see "Entering
Names" ( 88).
Push the knob to create a new sequence. The A3000 automatically names the sequence
"New Seq x " (where x is a sequential number that increments as necessary to avoid
name duplication).
CONTROL
MIDI / CTRL
Turn Knob 1 to select SeqSel.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
= sequence name
Knob 4 Knob 5
- -
-
Select P/S
Edit the Name
>NEW