Midi - Bulk (Bulk Dump) - Yamaha A3000 Owner's Manual

MIDI Function

MIDI - Bulk (Bulk Dump)

Sets parameters for MIDI bulk dumps.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 2
Knob 3
Chapter 8 UTILITY Mode
310
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
This page sets parameters related to MIDI bulk dumps.
Change Page
• Turn the knob to change to a different page within the MIDI function. Available pages
are: Receive, Adjust, RcvFlt, and Bulk (this page).
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Protect
This setting selects whether the A3000 accepts bulk-dump transmissions from con-
nected MIDI devices. If you set the protection off, the A3000 will accept and process
dumped data as soon as it is received. If you set the protection on, the A3000 ignores all
received bulk data.
Device#
This value sets the A3000's device number for purposes of bulk dumps.
The A3000 can transfer a bulk dump to/from another device only if the two devices have
consistent device-number settings.
off
1,...,16
all
CONTROL
MIDI / CTRL
Turn Knob 1 to select Bulk.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= off, on
= off, 1,...,16, all
The A3000 does not send or receive bulk dumps.
The A3000 can receive bulk dumps directed to this device number
only. It transmits all bulk dumps to this device number,
The A3000 accepts all bulk dumps, regardless of device number.
It transmits bulk dumps to Device #1 only.
Knob 4 Knob 5
- -
- -
Select P/S