Effect - Efct1 - Yamaha A3000 Owner's Manual

EFFECT Function
EFFECT - Efct1,...,Efct3 (Edit the Effects)
If "EffectEditType" is set to "full", the page appears as follows.
Sets parameters for the selected effect (Effect 1, 2, or 3).
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knobs 2, 3
Knob 5
Chapter 4 PLAY Mode
124
Use this page to edit the effects selected for the current program. The page's appearance
and operation varies according to whether "EffectEditType" value is set to "full" or "favorite"
( 127).
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to set parameter values for the selected effect (Effect 1, 2, or 3). You can
access and set all of the effect's parameters.
Change Page
• Turn the knob to change to a different page within the EFFECT function. Available
pages are: EfType, Efct1, Efct2, Efct3, In&Out, and EdType.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Parameter
Turn either knob to select the parameter whose value you want to view or set. You can
then set the value using Knob 5. You can repeat the sequence to set each of the available
parameters: first select the parameter with Knob 2 or 3, and then set the value with
Knob 5.
Note that the available parameters differ for each effect type. For a listing of parameters
and their meanings, refer to the "Effect parameter list" in the Appendix. ( 337)
Value
Turn the knob to set the value for the parameter selected by Knob 2 or 3.
CONTROL
MIDI / CTRL
Turn Knob 1 to select Efct1, Efct2, or Efct3.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= parameter name
= value
Knob 4 Knob 5
-
- -
Select P/S