Map/Out - Lvl&Mode - Yamaha A3000 Owner's Manual

MAP/OUT Function
MAP/OUT - Lvl&Mode
Sets the sample's level, pan, portamento, and poly/mono switch.
PLAY PROGRAM
EDIT TRIM / LOOP
REC RECORD
DISK PROGRAM
UTILITY TOTAL EQ
Turn action
Push action
Knob 1
Knob 2
Knob 3
Chapter 5 EDIT Mode
174
SAMPLE EASY EDIT EFFECT SETUP
MAP / OUT FILTER EG LFO
SETUP METER EFFECT EXT CTRL
SAMPLE SEQUENCE VOLUME DISK
PANEL PLAY SEQUENCE MASTER SYSTEM
Knob 1
Use this page to set the sample's level, pan, portamento, and poly/mono switch.
Change Page
• Turn the knob to change to a different page within the MAP/OUT function. Available
pages are: KeyRnge, VelRnge, Lvl&Mode (this page), Output, Pitch, Expand, and LvlScale.
• Push the knob to move to the Program/Sample Selection screen. ( 95)
Level
Turn the knob to set the sample's output level.
Pan
Turn the knob to set the sample's pan (stereo position). Positive values set the pan to the
right; negative values move the pan to the left.
If you are working with a stereo sample, higher pan magnitudes will narrow the stereo
range while noticeably shifting the sound position. See the illustration below.
CONTROL
MIDI / CTRL
Turn Knob 1 to select Lvl&Mode.
MONITOR
IMPORT
MIDI
Knob 2 Knob 3
- -
= 0,...,127
= -63,...,+63
Knob 4 Knob 5
--
Select P/S