Copy - Yamaha A3000 Owner's Manual

COPY

Copies the contents of the selected volume into another volume.
PLAY PROGRAM SAMPLE EASY EDIT
EDIT TRIM / LOOP MAP / OUT FILTER
REC RECORD SETUP METER
DISK PROGRAM SAMPLE SEQUENCE
UTILITY TOTAL EQ PANEL PLAY SEQUENCE
Turn action
Push action
• This command copies all data from one volume into another. The copy operation
• You use this command page to select the destination volume only. You must select
• Note that it is not possible to copy volumes to or from floppy disk.
Knob 1 Change Page
• Turn the knob to change to a different command page.
• Push the knob when you are ready to execute the copy. The A3000 returns a confir-
Destination Type = Dsk, Vol
Knob 3
Use this knob together with Knob 4 or 5 to select the destination volume for the copy.
Dsk
Vol
Knobs 4, 5 Destination
Use either knob to select the destination disk or volume.
EFFECT SETUP CONTROL
EG LFO MIDI / CTRL
EFFECT EXT CTRL MONITOR
VOLUME DISK IMPORT
MASTER SYSTEM MIDI
Knob 1 Knob 2
-
-
deletes (replaces) all data already existing in the destination volume.
the source volume before you call this page.
mation screen. Push Knob 5 (>YES) to proceed with the copy, or Knob 4 (>NO) to
cancel.
Use this to view or change the destination-disk setting. When
you select Dsk, the identity of the currently selected disk appears
above Knobs 4 and 5. If necessary, you can then turn either of
those knobs to change the destination disk.
Use this to change the volume setting. When you select Vol, the
name of the currently selected volume appears above Knobs 4
and 5. If necessary, you can then turn either of those knobs to
change the destination volume.
Press the COMMAND key, then turn Knob 1 to select >COPY.
Knob 3 Knob 4
- -
>COPY
Chapter 7
COMMAND Pages
Knob 5
-
DISK Mode
251